automatic spray coating system for glass parts
|Terms of Trade:||FOB,CFR,CIF|
|Min. Order:||1 Set/Sets|
|Delivery Time:||50 Days|
|Place of Origin:||China|
|Supply Ability:||3000sets per year|
Glass bottle automatic spray coating system for cosmetic bottles, wine bottles, perfume bottles, and other glass bottles.
and also we produce automatic glass bottle interior coating machine, high efficiency and high quality with paint saving.
3 steps for glass bottle automatic spray coating system procedure.
Step 1: Painting for base coat : Clean products-Load products on line-Preheating (IR oven)--base painting--IR leaveling preheating--UV curing--cooling--off-line
Step 2: Vacuum coating/metallizing: load products in evaporation vacuum coating machine-metallizing-unload products
Step 3: Painting for top coat: load products on UV line-electrostatic cleaning-top coat painting-IR leveling preheating-UV curing-cooling-unload products.
Example plan for automatic spray painting equipment/auto spray painting line for glass bottle.
Designed condition required:
spray painting equipment/line specification :90 degree tunning guiding wheel Φ240mm, back turning 1800 degree Φ 300mm wheel
Line speed : 1-25M/min, frequency conversion and adjustable
Heat sourcing: heating tubes
Curing oven temperature: 0-100℃ can be adjustable.
Power: AC380V 50HZ 3 phase
Lighting:AC220V 50HZ single phase
Power control:AC220V (transforming in the power box)
Compressor supply: :0.6±0.05MPa
Whater preasure :0.1MPa(1.0kg/cm2 above)
23pcs spindle per 1 meter
equipment total power : 80KW
Auto spray painting equipment production process:
Labor loading productions→electrostatic dust free---flame treatment---UV base coat,top coat spray booth→heating leveling→light curing---unloading for vacuum metallizing.
Electrostatic Dust Free Booth
Flame treatment booth
Booth Dimension : W1200mm*D1700mm*H1800mm
UV base coat top coat spray booth
Water curtain booth :
Spray gun systems:
Spray gun:WA-101 model(1.3 nozzle)
Solenoid valune spray gun control
Rotation type: belt rotation , front and back rotation function,crocking resistance , frequency conversion adjustable.
Heating leveling oven
IR lamps for heating
oven hight :800㎜
Temperature adjustable : 0-100℃
Electricity control system
stainless steel .
The equipment without including air supply ,exhaust pipes, deducting compressor etc.
Payment terms: 35% TT deposit, 65% TT balance before shipment.
Installation onsite support: 2 engineers for guiiding.
Glass bottle spray painting operation skills :
1, with a clean thinner or water to the paint sprayed to the appropriate viscosity, measured by coating -4 viscometer, the appropriate viscosity is generally 18 to 30 seconds. If there is no viscometer, visual method can be used: with a bar (iron bars or sticks) to stir up the paint to 20 cm high to stop the observation, such as paint in a short time (a few seconds) Too thick; such as a break from the barrel along the line is too thin; to 20 cm high when the stop, the paint into a straight line, and instantly become broken down into the drip, the viscosity is more appropriate. In this case,
2, the air pressure is best controlled at 0.3-0.4 MPa (3-4 kg force / square centimeter). Pressure is too small, poor paint spray, the surface will form pitting: pressure is too large and easy to hang, and the mist is too large, both a waste of material and affect the health of the operator. In this case,
3, the nozzle and the surface of the general spacing of 200-300 mm is appropriate. Too close to easy flow hanging; too far paint mist is not uniform, prone to pitting, and the nozzle from the surface of the far paint mist in the way of flying waste. The specific size of the interval, should be based on the types of glass paint, viscosity and pressure to adjust the size of the appropriate. When the air pressure, the distance can be a little bit, the pressure can be close to a little hour; the so-called far point is a little far between the 10 mm -50 mm range of adjustment, the pressure is too small, If this range is exceeded, it is difficult to obtain a desired paint film. In this case,
4, the gun can be used for up and down, left and right movement, preferably 10-12 m / min speed of uniform action, the nozzle should be straight to the surface coating, minimize oblique spraying. When sprayed to the surface at both ends of the gun, the gun button to quickly trigger the pine look, so that paint mist, due to the two ends of the surface, often to accept more than two spray, is the most likely to cause sagging place. In this case,
5, when spraying under a pressure to suppress a 1/3 or 1/4, so as not to leak leakage phenomenon. In the quick-drying paint spray, the need for a spray in accordance with the order. Fill spray effect is not satisfactory. In this case,
6, in the outdoor open space when spraying, pay attention to wind direction (wind should not be operating), the operator should stand in the wind direction, to prevent the paint mist was blown to the paint film has been caused by the disgrace of the grainy surface. In this case,
7, spraying the order is: the first difficult after the first, after the first outside. After the first low after the height of the first small area after a large area. So that will not cause the paint spray after the spray has been sprayed on a good film, the damage has been sprayed a good film.
Shenzhen Heng Yi Jia Technology Co., Ltd.
Shenzhen Heng Yi Jia Technology Co., Ltd. has focused on paint spraying equipment for over20 years in China. We started as a small operation, but now have become one of the leading painting line suppliers in the coating industry in China.
Today,Shenzhen Heng Yi Jia Technology Co., Ltd. has been one of the top producers of quality automatic spraying line and new technologies, such as: automatic paint spraying line, UV paint spraying line(uv lines), spray chrome line, mini auto painting line, spray chrome equipment and accessories of coating equipment of vacuum metallizing machine(metallizer), Automatic UV plating vacuum line, spray booth, coating chain, UV curing oven, automatic spray chrome equipment&line, spray powder coating line & equipment and so on.
Shenzhen Heng Yi Jia Technology Co., Ltd. is located in the China The beautiful coastal city-Shenzhen. As a global supplier in auo paint spraying line, UV paint spraying line, mini auto painting line, spray chrome line, spray chrome equipment and accessories of coating equipment. Heng Yi Coating Technology is to create added value for customers around the world.
Our products includes the following:
1, Automatic paint spraying line
2, UV paint spraying line
3, Mini automatic paint spraying machine
4,small automatic spray coating machine
5.UV spray coating line
6. automatic spray painting line
7.Industrial tunnel oven
9.UV curing machine
We supply coating products all over the globe to a wide range of companies worldwide, ranging from large multinational organizations to small individual companies.
Spray painting plant for Industry use are widely used in the following industry, such aspackage coating plant:
--- Glass packages coating for cosmetics, perfume, wine, caps, bottles and other parts
---Painting plant for product paint surface finishing
---Vacuum coating plant
Spray chrome equipment with formula which from our second production line, are widely used for cmetallzing oating, and vacuum coating machine etc.
We always feel that all success of our company is directly related to the quality of the products we offer. They meet the highest quality requirements as stipulated in ISO9001, ISO14000:14001 quality control system, CE certificate, etc.
We are capable of mixing and producing an paint spraying line, UV lines and offer some of the most advanced manufacturing capabilities available, including vacuum coating machine, mini paint spray machine and spray chrome machine etc.
We have customers from both domestic market and oversea market.Heng Yi Jia Technology Sales managers can speak fluent English for good communication. Our main sales market:
China : 50%
Our service for coating equipment.
Besides our existing molded spray painting line, auto paint spray line, uv paint line, mini paint spray line, spray chrome machine, also can produce other coating line according to the drawings from our customers. We control the product quality critically for every step during the manufacturing from custom coating equipment. We offer technical support that is second to none. installation at local.
- Company Name: Shenzhen Heng Yi Jia Technology Co., Ltd.
- Representative: Wu Juhua
- Product/Service: Powder coating machine , Automatic Spray painting coating Line , UV Coating machine Line , small automatic spray coating machine , tunnel oven , semi-automatic spray coating line
- Capital (Million US $): 50万
- Year Established: 2016
- Total Annual Sales Volume (Million US $): Below US$1 Million
- Export Percentage: 81% - 90%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: No.2 Street 5 Lao Keng Industrial Zone Keng Zi Shenzhen China
- Contact Person: Ms. Demi Wu
- Tel: +86-755-29492864
Premium Related Products