TS16949 Automotive IQ-View Auto Switch Wire Assemblies
|Terms of Trade:||FOB|
|Min. Order:||1000 Piece/Pieces|
|Delivery Time:||30 Days|
|Packaging:||Standard neutral packing|
|Place of Origin:||CHINA|
|Certificate:||IATF16949, UL, ISO9001|
Model No.: ETOP-WH1134
TS16949 Automotive IQ-View Auto Switch Wire Assemblies
This complicated cable assembly desgined for automotive IQ-view no switch system. It desgined for automotive IQ-view no switch system. Considering the cable loom is complicated enough with too much branches, we proposed to change the common correguated tube to be the special automotive split taping. By binding the many wires and cables into a cable harness, the wires and cables can be better secured against the adverse effects of vibrations, abrasions and moisture. Binding the wires into a flame-retardant sleeve also lowers the risk of electrical fires.
For automotive wiring harnesses, the reliablility and safety is always the top first, then our engineers focus on the customers concern. All process standardized by IPC 620 and quality ensured by IATF16949（TS16949). (APQP, PPAP, IPC620 standard, Milt-process, Special test)
01 The mainly wires used in this harness is #TXL from local suppliers. TXL wire is extra thin compared with GXL wire, it is a stranded, single-conductor, copper wire with cross-linked polyethylene insulation. Due to its extra thin wall, it features a low weight and insulation thickness. Thus, TXL wire is a primary automotive wire used for applications that require a lightweight wire of small diameter. It is rated to SAE J-1128, Ford (M1L-123A) and Chrysler (MS-8288) specifications.
TXL Wire is the perfect choice for automative application where heat and flame resistance are a stringent requirement, such as in the engine compartment of vehicles. The smooth finish makes it resistant to moisture, oil, gasoline, grease and most acids and solvents. The minimal diameter and weight of the TXL extra thin wire is ideal for tight spaces.
02 All components from original DEUTCH, also the littlle fuse box. Deutsch DT series one of P/N we used is 1011-349-1205 for Dust Cap, with integral mounting lug, fits all DT06-12S Plugs to provide waterproof protection for plug when not in use. The DT series dust caps are designed to provide protection for the connector interface when the two halves are not mated. Plastisol or thermoplastic dust caps are available for several DEUTSCH DT connector configurations.
03 The fuse box from littlefuse with 18 cavities that accept 2.8mm fuse and relay components and is the perfect fit for accessory circuits and overflow circuits from your main Power Distribution module. The user can customize their own circuitry utilizing direct wire-to-component connections which are crimped to the wire harness with grommets to seal the bottom of the module. Available with steel mounting bracket, refer to the picture. Module snaps into bracket, and is held at 30° angle or 90° angle (bracket dependent) to allow easy viewing and servicing.
ETOP Auto wire harnesses are widely used for various parts of automobiles, vehicles and truck, Like the engine valve cover gasket/diesel Gasket For FORD, headlamp, Intelligent Anti-collision System, car audio, rear-view mirror, power seat, GPS system,ECU, Hybird battery, engine, ADAS, auto seat, Buzz and sensor, Lamp, dieseal valve cover gasket fit, fuel pump, diagnostic OBD system etc. Also the complete cable assemblies for electric vehicle and e-bikes.
ETOP WIREHARNESS LIMITED
ETOP WIREHARNESS LIMITED is an IATF-16949 and UL certified wiring assembly manufacturer, also the company is an R&D and manufacturing base of extensive wire harness and connectors. Located in Dongguan, Guangdong with a plant area reaching 15,000 m2.
Most of our customers are OEMs or ODMs in USA, Germany, Japan, Australia, Sweden, etc. ETOP has their special sampling production line, also with fully-equipped internal tooling department for SR, connector, plastic part, or any other tooling parts efficiently. And our dedicated team can support customers with much more suggestions and techinics for developing their new products. All these can help customers shorten the L/T a lot with most competitive tooling and sampling cost.
The main advantages of ETOP is to provide harness design assistance, rapid in-house prototyping(CAD, SOLIDWORK), manufacturing engineering, tool making, also accept flexible Qty,even including working round-the-clock to meet tight turning-round time requirements. Customer satisfaction is always our top priority.
With more than ten years of experience and capabilities assisting our customers in various industry, ETOP would be confident to be your qualified AVL and reliable manufacturing partner. Just be free to contact us if you need any wire-harness solutions or partner for your products. Our professional and experienced team would support you by satisfied skill and service.
- Company Name: ETOP WIREHARNESS LIMITED
- Representative: Kavin Lee
- Product/Service: Wire Harness , Custom Cable Assemblies , Customized Molded Cables , Connectors , Automotive Wire Assembly , connectors overmolding
- Capital (Million US $): 1000000RMB
- Year Established: 2001
- Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 5
- No. of R&D Staff: 21 -30 People
- No. of QC Staff: 41 -50 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 5,000-10,000 square meters
- Factory Location: No. 288, Jinyu Team, Dani Village, Shatian Town, Dongguan, Guangdong, China
- Contact Person: Ms. Nicole Peng
- Tel: 86-769-81710115
Premium Related Products